Мониторы аккумуляторных батарей позволяют оценить остаточную емкость аккумуляторных батарей в % от номинальной, а также получать информацию о токах, напряжениях и режимах эксплуатации аккумуляторов. Применение мониторов АБ позволяет увеличить срок службы аккумуляторных батарей.
The new Battery Guard MBW40/60 (hereafter called MBW) is an intelligent, watertight, Battery Guard with accessory connections for a ON/OFF switch, Alarm buzzer or relay and our CurrentWatch current sensor (not included). The unit has two bolts as connection for the Input+ and the Output+ to guarantee low losses. Other connections, like the minus and the accessories, are made by a 4-pole 6.3mm faston connector. A blue LED shows the status (ON/OFF). In program- mode it shows the program position. The MBW has an 'Automatic Boardsystem Detection'; the MBW detects which battery voltage (12 or 24V) is used. This does not need to be programmed manualy. There is a choice out of 10 on/off threshold voltage programs, for both 12V and 24V, which can be programmed in a simple way. The MBW uses very little current. In the OFF mode or when in undervoltage the MBW uses just 2mA or less.
The MBW 200 is a vital part for a mobile installation. It increases the battery live. It has low voltage, high voltage and overload protection. Low voltage detection can easily be adjusted by a rotation switch. This way any type of (lead acid) battery can be protected against deep charge. The over voltage protection protects your costly devices against to high
The MBW 200 can easily be used as a main switch. This can be achieved by connecting a panel switch between the ground (-) and the switch connection. The main switch function cannot be used when this switch is not connected. In this case the MBW 200 operates as a MBW 200 only. The status of the MBW 200 is displayed by the three color status led.